Registered specifications and reference data matching the model code are linked. Check first-registration date, measured values and unregistered items against your own vehicle.
Using Suzuki's general reference values.They fill in items without model-specific values. As they are not model-specific specifications, check the year and original-wheel conditions in the owner's manual.
The selected vehicle's seat type is highlighted. Nothing is highlighted if it is unregistered or varies by specification. Different seat shapes are not interchangeable.
Specifications linked to vehicle data
1 entries. Registered values, verified documents and model-code references take priority; missing items show the manufacturer's general reference values. Where no value applies, ‘Check’ is shown.
Wheel tightening torque and specifications by model code
General reference values by manufacturer. Specifications vary by year, model and original wheel. Always check the specified value in the vehicle's owner's manual.
Japanese manufacturers: reference torque
Manufacturer
Thread size
HEX
Original seat
Reference torque
Reference range
Toyota
M12×1.5
21 mm
Flat (with washer)
103 N·m
100–110 N·mTypical ≈ 10.5 kgf·m
LexusBOLT
M14×1.5
17 mm
60° taper
140 N·m
140–140 N·mTypical ≈ 14.3 kgf·m
Nissan
M12×1.25
21 mm
60° taper
108 N·m
98–118 N·mTypical ≈ 11.0 kgf·m
Honda
M12×1.5
19 mm
Spherical (R12/R13)
108 N·m
98–118 N·mTypical ≈ 11.0 kgf·m
Mazda
M12×1.5
21 mm
60° taper
108 N·m
88–118 N·mTypical ≈ 11.0 kgf·m
Subaru
M12×1.25
19 mm
60° taper
120 N·m
100–120 N·mTypical ≈ 12.2 kgf·m
Mitsubishi
M12×1.5
21 mm
60° taper
98 N·m
88–108 N·mTypical ≈ 10.0 kgf·m
Suzuki
M12×1.25
17 / 19 mm
60° taper
85 N·m
70–100 N·mTypical ≈ 8.7 kgf·m
Daihatsu
M12×1.5
19 / 21 mm
60° taper
103 N·m
90–110 N·mTypical ≈ 10.5 kgf·m
Imported manufacturers: reference torque
General reference values by manufacturer. Specifications vary by year, model and original wheel. Always check the specified value in the vehicle's owner's manual.
Imported manufacturers: reference torque
Manufacturer
Thread size
HEX
Original seat
Reference torque
Reference range
Volkswagen / AudiBOLT
M14×1.5
17 mm
Spherical (R12/R13)
120 N·m
110–140 N·mTypical ≈ 12.2 kgf·m
BMW / MINIBOLT
M14×1.25
17 mm
60° taper
140 N·m
120–140 N·mTypical ≈ 14.3 kgf·m
Mercedes-BenzBOLT
M14×1.5
17 mm
Spherical (R12/R13)
130 N·m
110–150 N·mTypical ≈ 13.3 kgf·m
VolvoBOLT
M14×1.5
19 mm
60° taper
140 N·m
120–140 N·mTypical ≈ 14.3 kgf·m
PorscheBOLT
M14×1.5
19 mm
Spherical (R12/R13)
160 N·m
130–160 N·mTypical ≈ 16.3 kgf·m
Thread size reference
Thread sizes, hex sizes and main manufacturers
Thread size
HEX
Main manufacturers
M12×1.25
17 / 19 / 21 mm
Nissan, Subaru, Suzuki, etc.
M12×1.5
19 / 21 mm
Toyota, Honda, Mazda, Mitsubishi, Daihatsu, etc.
M14×1.5
17 / 19 / 21 / 22 mm
European cars, large SUVs, commercial vehicles, etc.
M14×1.25
17 mm
BMW / MINI (recent models)
M14×2.0
19 / 21 / 22 mm
Some US vehicles
Collected model-specific reference data
0 of 105 entries match the search. These are reference values for representative specifications by model and model code. Check the applicable years and the actual vehicle. Rows showing manufacturer general values are distinguished from model-specific values.
Reading threads and seats, and tightening
M12×1.5 means a 12 mm nominal diameter and 1.5 mm pitch. It is not interchangeable with M12×1.25 or M14 threads. Hex size is the socket size. Match the 60° taper, spherical or flat seat to the shape the wheel specifies.
Tighten in a star pattern over several passes, then confirm the torque specified in the owner's manual with a torque wrench. Follow the manufacturer's instructions on lubrication and re-checking.