Skip to main content

TorqueSpec

Wheel Torque & Thread Reference

Search wheel tightening torque, thread size and seat type by model and model code.

Station wagon illustration
Vehicle · shared by all tools

BMW 5シリーズ PW48

550i ツーリング・5W/G (2WD, 6AT) 2008/10–2010/10

Clear vehicle

Linked in this tool: Tightening torque, Thread

Calculate offset for this vehicle →

Select country → manufacturer → model → model code/years → grade.

Search directly by model name or model code

Vehicles without registered tyre and wheel data can also be selected.

Apply this vehicle →

Registered specifications and reference data matching the model code are linked. Check first-registration date, measured values and unregistered items against your own vehicle.

Selected vehicle's mounting specifications

5シリーズ · ABA-PW48

550i ツーリング・5W/G (2WD, 6AT) 2008/10–2010/10

Original-wheel reference
Wheel tightening torque140N·m

≈ 14.28 kgf·m / 103.3 lb·ft

Manufacturer reference (general value)
Diameter × pitchM14×1.25Manufacturer reference (general value)
Hex size (HEX)17 mmManufacturer reference (general value)
Original seat60° taperManufacturer reference (general value)
PCD / studs120 mm / 5 studsSelected vehicle's specifications
Fastening typeBoltManufacturer reference (general value)

Using BMW / MINI's general reference values.They fill in items without model-specific values. As they are not model-specific specifications, check the year and original-wheel conditions in the owner's manual.

Reference torque range: 120–140 N·m

Convert torque units for this vehicle →
TORQUE & SEAT

Tightening torque and seat

N·m

/ HEX

Seat:

60° taperSpherical (ball)Flat

The selected vehicle's seat type is highlighted. Nothing is highlighted if it is unregistered or varies by specification. Different seat shapes are not interchangeable.

Specifications linked to vehicle data

1 entries. Registered values, verified documents and model-code references take priority; missing items show the manufacturer's general reference values. Where no value applies, ‘Check’ is shown.

Wheel tightening torque and specifications by model code
Model, model code and yearsReference torqueThreadHex sizeSeat and fasteningSources and vehicle
BMW5シリーズPW482007/08–2010/10140 N·mManufacturer reference (general value)M14×1.25Manufacturer reference (general value)17 mmManufacturer reference (general value)60° taperManufacturer reference (general value)Bolt View vehicle and grades →
Japanese manufacturers: reference torque

General reference values by manufacturer. Specifications vary by year, model and original wheel. Always check the specified value in the vehicle's owner's manual.

Japanese manufacturers: reference torque
ManufacturerThread sizeHEXOriginal seatReference torqueReference range
ToyotaM12×1.521 mmFlat (with washer)103 N·m100–110 N·mTypical ≈ 10.5 kgf·m
LexusBOLTM14×1.517 mm60° taper140 N·m140–140 N·mTypical ≈ 14.3 kgf·m
NissanM12×1.2521 mm60° taper108 N·m98–118 N·mTypical ≈ 11.0 kgf·m
HondaM12×1.519 mmSpherical (R12/R13)108 N·m98–118 N·mTypical ≈ 11.0 kgf·m
MazdaM12×1.521 mm60° taper108 N·m88–118 N·mTypical ≈ 11.0 kgf·m
SubaruM12×1.2519 mm60° taper120 N·m100–120 N·mTypical ≈ 12.2 kgf·m
MitsubishiM12×1.521 mm60° taper98 N·m88–108 N·mTypical ≈ 10.0 kgf·m
SuzukiM12×1.2517 / 19 mm60° taper85 N·m70–100 N·mTypical ≈ 8.7 kgf·m
DaihatsuM12×1.519 / 21 mm60° taper103 N·m90–110 N·mTypical ≈ 10.5 kgf·m
Imported manufacturers: reference torque

General reference values by manufacturer. Specifications vary by year, model and original wheel. Always check the specified value in the vehicle's owner's manual.

Imported manufacturers: reference torque
ManufacturerThread sizeHEXOriginal seatReference torqueReference range
Volkswagen / AudiBOLTM14×1.517 mmSpherical (R12/R13)120 N·m110–140 N·mTypical ≈ 12.2 kgf·m
BMW / MINIBOLTM14×1.2517 mm60° taper140 N·m120–140 N·mTypical ≈ 14.3 kgf·m
Mercedes-BenzBOLTM14×1.517 mmSpherical (R12/R13)130 N·m110–150 N·mTypical ≈ 13.3 kgf·m
VolvoBOLTM14×1.519 mm60° taper140 N·m120–140 N·mTypical ≈ 14.3 kgf·m
PorscheBOLTM14×1.519 mmSpherical (R12/R13)160 N·m130–160 N·mTypical ≈ 16.3 kgf·m
Thread size reference
Thread sizes, hex sizes and main manufacturers
Thread sizeHEXMain manufacturers
M12×1.2517 / 19 / 21 mmNissan, Subaru, Suzuki, etc.
M12×1.519 / 21 mmToyota, Honda, Mazda, Mitsubishi, Daihatsu, etc.
M14×1.517 / 19 / 21 / 22 mmEuropean cars, large SUVs, commercial vehicles, etc.
M14×1.2517 mmBMW / MINI (recent models)
M14×2.019 / 21 / 22 mmSome US vehicles

Collected model-specific reference data

0 of 105 entries match the search. These are reference values for representative specifications by model and model code. Check the applicable years and the actual vehicle. Rows showing manufacturer general values are distinguished from model-specific values.

Reading threads and seats, and tightening

M12×1.5 means a 12 mm nominal diameter and 1.5 mm pitch. It is not interchangeable with M12×1.25 or M14 threads. Hex size is the socket size. Match the 60° taper, spherical or flat seat to the shape the wheel specifies.

Tighten in a star pattern over several passes, then confirm the torque specified in the owner's manual with a torque wrench. Follow the manufacturer's instructions on lubrication and re-checking.

Torque unit conversion and wrench correction →

View original sizes and grades for the BMW 5シリーズ PW48 →

TOP