TorqueSpec
Wheel Torque & Thread Reference
Search wheel tightening torque, thread size and seat type by model and model code.
ホンダ インサイト ZE3
標準
Linked in this tool: Tightening torque, Thread
Calculate offset for this vehicle →Select country → manufacturer → model → model code/years → grade.
Search directly by model name or model code
Vehicles without registered tyre and wheel data can also be selected.
Registered specifications and reference data matching the model code are linked. Check first-registration date, measured values and unregistered items against your own vehicle.
インサイト · ZE3
標準
≈ 11.01 kgf·m / 79.7 lb·ft
Manufacturer reference (general value)Using Honda's general reference values.They fill in items without model-specific values. As they are not model-specific specifications, check the year and original-wheel conditions in the owner's manual.
Reference torque range: 98–118 N·m
Tightening torque and seat
N·m
/ HEX
Seat:
The selected vehicle's seat type is highlighted. Nothing is highlighted if it is unregistered or varies by specification. Different seat shapes are not interchangeable.
Specifications linked to vehicle data
1 entries. Registered values, verified documents and model-code references take priority; missing items show the manufacturer's general reference values. Where no value applies, ‘Check’ is shown.
| Model, model code and years | Reference torque | Thread | Hex size | Seat and fastening | Sources and vehicle |
|---|---|---|---|---|---|
| ホンダインサイトZE32011– | 108 N·mManufacturer reference (general value) | M12×1.5Manufacturer reference (general value) | 19 mmManufacturer reference (general value) | Spherical (ball)Manufacturer reference (general value)Nut | View vehicle and grades → |
Japanese manufacturers: reference torque
General reference values by manufacturer. Specifications vary by year, model and original wheel. Always check the specified value in the vehicle's owner's manual.
| Manufacturer | Thread size | HEX | Original seat | Reference torque | Reference range |
|---|---|---|---|---|---|
| Toyota | M12×1.5 | 21 mm | Flat (with washer) | 103 N·m | 100–110 N·mTypical ≈ 10.5 kgf·m |
| LexusBOLT | M14×1.5 | 17 mm | 60° taper | 140 N·m | 140–140 N·mTypical ≈ 14.3 kgf·m |
| Nissan | M12×1.25 | 21 mm | 60° taper | 108 N·m | 98–118 N·mTypical ≈ 11.0 kgf·m |
| Honda | M12×1.5 | 19 mm | Spherical (R12/R13) | 108 N·m | 98–118 N·mTypical ≈ 11.0 kgf·m |
| Mazda | M12×1.5 | 21 mm | 60° taper | 108 N·m | 88–118 N·mTypical ≈ 11.0 kgf·m |
| Subaru | M12×1.25 | 19 mm | 60° taper | 120 N·m | 100–120 N·mTypical ≈ 12.2 kgf·m |
| Mitsubishi | M12×1.5 | 21 mm | 60° taper | 98 N·m | 88–108 N·mTypical ≈ 10.0 kgf·m |
| Suzuki | M12×1.25 | 17 / 19 mm | 60° taper | 85 N·m | 70–100 N·mTypical ≈ 8.7 kgf·m |
| Daihatsu | M12×1.5 | 19 / 21 mm | 60° taper | 103 N·m | 90–110 N·mTypical ≈ 10.5 kgf·m |
Imported manufacturers: reference torque
General reference values by manufacturer. Specifications vary by year, model and original wheel. Always check the specified value in the vehicle's owner's manual.
| Manufacturer | Thread size | HEX | Original seat | Reference torque | Reference range |
|---|---|---|---|---|---|
| Volkswagen / AudiBOLT | M14×1.5 | 17 mm | Spherical (R12/R13) | 120 N·m | 110–140 N·mTypical ≈ 12.2 kgf·m |
| BMW / MINIBOLT | M14×1.25 | 17 mm | 60° taper | 140 N·m | 120–140 N·mTypical ≈ 14.3 kgf·m |
| Mercedes-BenzBOLT | M14×1.5 | 17 mm | Spherical (R12/R13) | 130 N·m | 110–150 N·mTypical ≈ 13.3 kgf·m |
| VolvoBOLT | M14×1.5 | 19 mm | 60° taper | 140 N·m | 120–140 N·mTypical ≈ 14.3 kgf·m |
| PorscheBOLT | M14×1.5 | 19 mm | Spherical (R12/R13) | 160 N·m | 130–160 N·mTypical ≈ 16.3 kgf·m |
Thread size reference
| Thread size | HEX | Main manufacturers |
|---|---|---|
| M12×1.25 | 17 / 19 / 21 mm | Nissan, Subaru, Suzuki, etc. |
| M12×1.5 | 19 / 21 mm | Toyota, Honda, Mazda, Mitsubishi, Daihatsu, etc. |
| M14×1.5 | 17 / 19 / 21 / 22 mm | European cars, large SUVs, commercial vehicles, etc. |
| M14×1.25 | 17 mm | BMW / MINI (recent models) |
| M14×2.0 | 19 / 21 / 22 mm | Some US vehicles |
Collected model-specific reference data
0 of 105 entries match the search. These are reference values for representative specifications by model and model code. Check the applicable years and the actual vehicle. Rows showing manufacturer general values are distinguished from model-specific values.
Reading threads and seats, and tightening
M12×1.5 means a 12 mm nominal diameter and 1.5 mm pitch. It is not interchangeable with M12×1.25 or M14 threads. Hex size is the socket size. Match the 60° taper, spherical or flat seat to the shape the wheel specifies.
Tighten in a star pattern over several passes, then confirm the torque specified in the owner's manual with a torque wrench. Follow the manufacturer's instructions on lubrication and re-checking.
Torque unit conversion and wrench correction →View original sizes and grades for the ホンダ インサイト ZE3 →