CoiloverPro
Coilover Setup Calculator
What this calculator can do
- Set body length, preload and motion ratio for each axle and compare ride-height change, rake and remaining stroke.
- SVG drawings of the body side and spring/damper follow your inputs. Body movement is drawn to scale relative to the wheelbase.
スバル ステラ カスタム RN2
R・i (4WD, CVT) 2009/11–2011/05
No specifications for this tool are registered. The vehicle selection is kept; enter the conditions manually.
Calculate offset for this vehicle →Select country → manufacturer → model → model code/years → grade.
Search directly by model name or model code
Vehicles without registered tyre and wheel data can also be selected.
Registered specifications and reference data matching the model code are linked. Check first-registration date, measured values and unregistered items against your own vehicle.
0vehicle reference inputs loaded. Other fields retain example values; adjust them to the vehicle.
Adjust inputs
Display and calculation mode
Front
Rear
Diagram and results
Updating…Reference body outlines and panel lines form a simplified drawing. Front is left and rear is right. The body moves while tyres remain on the road. Vertical movement uses the entered wheelbase scale; body angle follows the calculated rake change. The outline does not reproduce a specific vehicle's dimensions.
Front / STROKE
Bump 60.0 mm
Rebound 60.0 mm
Rear / STROKE
Bump 60.0 mm
Rebound 60.0 mm
All calculation results 10 items
- Front ride-height change (mm)
- 0.000
- Front remaining bump travel (mm)
- 60.000
- Front remaining rebound travel (mm)
- 60.000
- Front effective wheel rate (N/mm)
- 78.453
- Rear ride-height change (mm)
- 0.000
- Rear remaining bump travel (mm)
- 60.000
- Rear remaining rebound travel (mm)
- 60.000
- Rear effective wheel rate (N/mm)
- 78.453
- Front–rear difference (+ = nose up, mm)
- 0.000
- Rake change (°)
- 0.000
Save and share these calculation inputs
Copy the URL to share or bookmark these conditions. Inputs are also retained in this browser after changes, separately for each tool and vehicle. URL parameters take priority.
How to use and assumptions
- Assumptions
- A relative comparison for full-length-adjustable coilovers with linear springs. Motion ratio is always wheel travel ÷ shock travel. In this model, more preload raises ride height and reduces bump travel. Load mode is a simple estimate of corner weight ÷ spring rate and does not apply load multiplication from the motion ratio.
- Formula
- Baseline sag = measured value, or corner weight ÷ spring rate. New sag = baseline sag + preload (within 0 to total stroke). Ride-height change = (body-length adjustment + preload) × motion ratio. Remaining bump travel = total stroke − new sag.
View original sizes and grades for the スバル ステラ カスタム RN2 →