Skip to main content

CoiloverPro

Coilover Setup Calculator

What this calculator can do

  • Set body length, preload and motion ratio for each axle and compare ride-height change, rake and remaining stroke.
  • SVG drawings of the body side and spring/damper follow your inputs. Body movement is drawn to scale relative to the wheelbase.
Coupe illustration
Vehicle · shared by all tools

フィアット クーペフィアット 175A1

ベースグレード (2WD, 5MT) 1995/01–

Clear vehicle

Linked in this tool: Wheelbase (mm)

Calculate offset for this vehicle →

Select country → manufacturer → model → model code/years → grade.

Search directly by model name or model code

Vehicles without registered tyre and wheel data can also be selected.

Apply this vehicle →

Registered specifications and reference data matching the model code are linked. Check first-registration date, measured values and unregistered items against your own vehicle.

1vehicle reference inputs loaded. Other fields retain example values; adjust them to the vehicle.

SETTINGS

Adjust inputs

Display and calculation mode

Front

-100100

040

Rear

-100100

040

Diagram and results

Updating…
Front ride-height change (mm)0.00
Rear ride-height change (mm)0.00
Front–rear difference (+ = nose up, mm)0.00
LIVE SIMULATIONInputs update the diagram
Front and rear ride-height change / SIDE VIEW
FRONT 0.0 mmREAR 0.0 mm

Reference body outlines and panel lines form a simplified drawing. Front is left and rear is right. The body moves while tyres remain on the road. Vertical movement uses the entered wheelbase scale; body angle follows the calculated rake change. The outline does not reproduce a specific vehicle's dimensions.

Front / STROKE

Bump 60.0 mm

Rebound 60.0 mm

Rear / STROKE

Bump 60.0 mm

Rebound 60.0 mm

All calculation results 10 items
Front ride-height change (mm)
0.000
Front remaining bump travel (mm)
60.000
Front remaining rebound travel (mm)
60.000
Front effective wheel rate (N/mm)
78.453
Rear ride-height change (mm)
0.000
Rear remaining bump travel (mm)
60.000
Rear remaining rebound travel (mm)
60.000
Rear effective wheel rate (N/mm)
78.453
Front–rear difference (+ = nose up, mm)
0.000
Rake change (°)
0.000
Save and share these calculation inputs

Copy the URL to share or bookmark these conditions. Inputs are also retained in this browser after changes, separately for each tool and vehicle. URL parameters take priority.

Select and copy the URL. A shared link does not verify fitment or the accuracy of the inputs.

How to use and assumptions
Assumptions
A relative comparison for full-length-adjustable coilovers with linear springs. Motion ratio is always wheel travel ÷ shock travel. In this model, more preload raises ride height and reduces bump travel. Load mode is a simple estimate of corner weight ÷ spring rate and does not apply load multiplication from the motion ratio.
Formula
Baseline sag = measured value, or corner weight ÷ spring rate. New sag = baseline sag + preload (within 0 to total stroke). Ride-height change = (body-length adjustment + preload) × motion ratio. Remaining bump travel = total stroke − new sag.

View original sizes and grades for the フィアット クーペフィアット 175A1 →

TOP